Grease your Pioneer35A 4×4 fork truck

When the 4WD forklift you purchased arrives, fill it with grease according to the maintenance manual requirements before use.

Grease can reduce the wear of components and increase the service life of the forklift.

Let’s learn about the following grease filling guide for Pioneer series 3.5-ton （CPCY35） and 3-ton （CPCY30）forklifts.

The Pioneer series 3-3.5 ton rough terrain forklifts have the following models, Pioneer30, Pioneer35, Pioneer35A, Pioneer35Pro.

Where does grease need to be added?

Pioneer35A has 16 grease filling ports, which are distributed on the mast, transmission shaft, swing shaft, vertical shaft of the axle, and half-shaft universal joint.It needs to be checked one by one and added.

How much grease should be added?

When adding grease, observe the location to be lubricated at the same time to ensure that the grease fills the gaps and there is a small amount of overflow.

Grease filling cycle

During the use of the four-wheel drive forklift, it is necessary to check and add grease every 8 hours of operation.

How to fill industrial grease for rough terrain forklift?