During the handling operation of off-road forklift truck, there are phenomena such as overload, unbalanced shaking of loading and unloading items, and accidental falling of goods, etc. The possible cause is that the off-road forklift lifts the load too fast during operation or the speed exceeds the regulations during transportation. At this time, the goods on the vehicle fall due to sudden braking and avoidance in case of circumstances. It may also be that the goods are not tied tightly with the vehicle body as required, or the goods loaded are not matched with the fork arm device of the off-road forklift, resulting in the goods falling off the rack.
What are the risks when operating off-road forklifts?
The tires should be selected and installed correctly, and the appropriate inner tube should be selected according to the tire specification. Tires assembled on the same machine should belong to the same brand, the same structure and the same performance. If this cannot be achieved, tyres of the same specification, brand, pattern and type should be assembled on the same axle; When changing new tires, the whole vehicle should be changed at the same time; Tyres with directional patterns shall be installed in accordance with the regular rolling direction; When changing to a new tire, install the new tire on the front wheel and the repaired tire on the rear wheel.
For the safe use of off-road forklifts, operators should carefully check whether there are problems in safety management horn lights, backup alarms and other components before operation. Pay attention to how fast the off-road vehicle can be opened. Check for changes in sexual stability. Operators should fasten their safety belts and follow relevant specifications before each operation.
This risk can be completely solved according to the following points or avoided as far as possible. When operating the off-road forklift, try to be stable. Stack the goods neatly and tie them tightly with the forks before transportation. Do not brake and turn sharply when driving. For potholes, the road surface shall be leveled in time. At the same time, the goods shall not be overloaded and unloaded according to the relevant procedures.
When the fork frame is overloaded, the rear of the car will be cocked up. At this time, let personnel stand at one end of the off-road forklift and use their weight as a balance weight. As a result, the rear of the car suddenly cocked up when lifting goods, causing personnel to fall. This accident may be caused by the overload of the off-road forklift or the lack of protective measures for the standing position of personnel.